37
(6) Description of MENU 4 Functions
MENU4<STATUS>(REF.)
HUE 50.0 HEIGHT 50.0
CHROMA 50.0 WIDTH 60.4
BRIGHT 60.1 MK.PHASE10.0
CONT 61.0 H.CENT 60.1
G.GAIN 62.5 V.CENT 63.5
B.GAIN 61.2 ROTAT. 60.0
R.BKG 50.2 MOIRE 1.6
G.BKG 52.4 TRAPE 45.2
B.BKG 48.5 SIDEP. 40.3
APT OFF
NEXT→(MENU) EXIT→(ESC)%
①CurrentlyselectedFILEnumber
②Datadisplay
① Currently selected FILE number
Displays the currently selected FILE number.
(7) Description of MENU 5 Functions
MENU5<LOCK>(UNLOCK)
-ENTERPASSWORD-
ABCDEFGHIJKLMNOPQRSTUVW
XYZ123456789
PASSWORD****
NEXT→(MENU)
SELECT→(ENT)EXIT→(ESC)
MENU5<LOCK>(UNLOCK)
-ENTERPASSWORD-
ABCDEFGHIJKLMNOPQRSTUVW
XYZ123456789
PASSWORDABCD
MODE ALLLOCK
NEXT→(MENU)
SELECT→(ENT)EXIT→(ESC)
①CurrentlyselectedLOCKMODE
②Passwordmenu
③Passwordinput
④LOCKMODE
① Currently selected LOCK MODE
The currently selected LOCK MODE is displayed
here.
UNLOCK: All data can be changed with the LOCK
released.
ALL LOCK:
Change of all PRESET data and switching of FILE
are disabled.
PRESET & FILE LOCK:
PRESET and FILE data are locked. Switching of
FILE is allowed.
② Password menu
Using the rotary encoder, select the characters here
to set the password.
③ Password input
When setting the LOCK mode to ALL LOCK or
PRESET & FILE LOCK, or when exiting the LOCK
mode (UNLOCK), select the characters from the
menu and enter the 4-digit password here.
If you forgot your password, contact the nearest
Ikegami dealer.
We will provide a password to exit the LOCK mode.
④ LOCK MODE setting
When the ENT switch is pressed after entering
the password, the LOCK mode blinks and can be
changed by the rotary encoder. After this, fix the
settings using the ENT switch and return to the
previous state using the ESC switch.
② Data display
Various preset data are displayed in the range of 0
to 100% (0.1% resolution).
To Next Page
Loading...
Need help?
General
