Imation Link - Mac Installation and Connection; Installing the Software

MAC REQUIREMENTS:
DisplayLink software can be used on Intel-based MACs, from Laptops to Desktops, running MacOS
10.4 (Tiger), 10.5 (Leopard) and 10.6 (Snow Leopard).
NOTE: PowerPC-based Macintosh computers, such as late-model iMacs, PowerBooks and
PowerMacs, are not currently supported.
The performance of the software is dependent upon the processing power available, as well as the
operating system in use. More capable systems offer higher performance.
INSTALLING THE SOFTWARE:
30
MAC INSTALLATION AND CONNECTION
Do not connect the AC power to the Video Base
unit until advised to do so.
1. Insert the CD ROM and double-click on the
application, DisplayLink-OSX-1.5.
2. Click on DisplayLink Software Installer.
3. Click Continue to determine if the installer can
be installed.