Inateck BCST-20 - 3.2 Code 25: Industrial 25

30
3.2 Code 25 : Industrial 25
Decide whether or not to enable Industrial 25. The BCST-20 Scanner
defaults disable Industrial 25.
Note: Read the "Disable Industrial 25" barcode will make the scanner
not able to read the Industrial 25 barcode. Thus, if the scanner cannot
read the Industrial 25 barcode, please try to read "Enable Industrial
25" to reset.
For example: Enable Industrial 25.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Industrial 25" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
(*) Disable Industrial 25
Enable Industrial 25