Inateck BCST-20 - 3.12 UPC-E

45
3.12 UPC-E
Decide whether or not to enable UPC-E. The BCST-20 Scanner
defaults enable UPC-E.
3.12.1 Checksum Transmission
Decide whether or not to include the checksum character in the data
being transmitted.
For example: Do Not Transmit UPC-E Checksum
1. Read the "Enter Setup" barcode;
2. Read the "Enable UPC-E" barcode;
3. Read the "Do Not Transmit UPC-E Checksum" barcode;
4. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
Disable UPC-E
(*) Enable UPC-E
(*) Transmit UPC-E Checksum
Do Not Transmit UPC-E Checksum