Inateck BCST-20 - 3.11 UPC-A

44
3.11 UPC-A
Decide whether or not to add "0" in the output of UPC-A data.
3.11.1 Checksum Transmission
Decide whether or not to include the checksum character in the data
being transmitted.
For example: UPC-A Output "0", Do Not Transmit UPC-A Checksum.
1. Read the "Enter Setup" barcode;
2. Read the "UPC-A Output "0"" barcode;
3. Read the "Do Not Transmit UPC-A Checksum" barcode;
4. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
(*) UPC-A Do Not Output "0"
UPC-A Output "0"
(*) Transmit UPC-A Checksum
Do Not Transmit UPC-A Checksum