Inateck BCST-20 - 3.7 Code 93

38
3.7 Code 93
Decide whether or not to enable Code 93. The BCST-20 Scanner
defaults disable Code 93.
Note: Read the "Disable Code 93" barcode will make the scanner not
able to read the Code 93 barcode. Thus, if the scanner cannot read
the Code 93 barcode, please try to read "Enable Code 93" to reset.
For Example: Enable Code 93.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 93" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
(*) Disable Code 93
Enable Code 93