Inateck BCST-20 - 3.13 MSI

46
3.13 MSI
Decide whether or not to enable MSI. The BCST-20 Scanner defaults
disable MSI.
Note: Read the "Disable MSI" barcode will make the scanner not able
to read the MSI barcode. Thus, if the scanner cannot read the MSI
barcode, please try to read "Enable MSI" to reset.
For example: Enable MSI.
1. Read the "Enter Setup" barcode;
2. Read the "Enable MSI" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
(*) Disable MSI
Enable MSI