Inateck BCST-20 - 3.4 Code 25: Matrix 25

32
3.4 Code 25 : Matrix 25
Decide whether or not to enable Matrix 25. The BCST-20 Scanner
defaults disable Matrix 25.
Note: Read the "Disable Matrix 25" barcode will make the scanner not
able to read the Matrix 25 barcode. Thus, if the scanner cannot read
the Matrix 25 barcode, please try to read "Enable Matrix 25" to reset.
For example: Enable Matrix 25.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Matrix 25" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
(*) Disable Matrix 25
Enable Matrix 25