35
3.6.1 Start/Stop Transmission
Decide whether or not to include the Start/Stop characters in the data
being transmitted.
For example: Do Not Transmit Code 39 Start/Stop Characters.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 39" barcode; (If Code 39 is disabled, it is
need to set);
3. Read the "Do Not Transmit Code 39 Start/Stop Characters"
barcode;
4. Read the "Exit with Save" barcode.
Do Not Transmit Code 39 Start/Stop Characters
(*) Transmit Code 39 Start/Stop Characters
Enter Setup
Exit with Save
Exit without Save
To Next Page
Loading...
