Inateck BCST-20 - 3.3 Code 25: Interleaved 25

31
3.3 Code 25 : Interleaved 25
Decide whether or not to enable Interleaved 25. The BCST-20
Scanner defaults disable.
Note: Read the "Disable Interleaved 25" barcode will make the
scanner not able to read the Interleaved 25 barcode. Thus, if the
scanner cannot read the Interleaved 25 barcode, please try to read
"Enable Interleaved 25" to reset.
For example: Enable Interleaved 25.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Interleaved 25" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
(*) Disable Interleaved 25
Enable Interleaved 25