47
3.14 Code 11
Decide whether or not to enable Code 11. The BCST-20 Scanner
defaults disable Code 11.
Note: Read the "Disable Code 11" barcode will make the scanner not
able to read the Code 11 barcode. Thus, if the scanner cannot read
the Code 11 barcode, please try to read "Enable Code 11" to reset.
For example: Enable Code 11.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 11" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
(*) Disable Code11
Enable Code11
To Next Page
Loading...
