Inateck BCST-20 - Step 3: Read a Setup barcode; Step 4: Exit the Setting Mode

Step 3: Read a Setup barcode. The BCST-20 Barcode Scanner
will response three beeps (tone ascending from low to
high), and its LED indicator will flash purple.
For Example:
Step 4: Exit the Setting Mode. The BCST-20 Barcode Scanner will
response three beeps (tone descending from high to low),
and its LED indicator will not flash purple and power off.
Note: When any setup error occurs, the BCST-20 Barcode
Scanner will respond with a long beep (low tone), and its
LED indicator will flash purple.
Steps of Setup
Enter Setup
Details (eg: Enable/Disable a Barcode)
Exit Setup
Enter Setup
Exit with Save
Enable Codabar
8