User Manual PROFview XL 4 The PROFview XL Application Software
4.11.2 Graphics
Use the "File" → "Export" → "Graphics" menu to export various graphical representations of measurement
data as bitmap graphics (.bmp). This is only possible if measurement data for the currently selected measur-
ing point and/or the relevant station exist. If this is not the case, the relevant measuring item is disabled.
4.12 Settings
The "Settings..." command in the "Tools" menu opens a dialog box where you can adapt the program to your
specific requirements. Here you can influence the behavior of the application software and of the PBT device.
The settings in this dialog box will not be saved in the current document, but instead in the Windows® registry
for the program.
4.12.1 General settings
Display tool tips
When you move the mouse pointer over a window element (e.g. a button) and
stop over it for a short time, the program will display tool tips.
Display warning before
overwriting measurement
data
If you select this option, a message is displayed warning you that the data of
previous measurements will be overwritten when you start a new individual/con-
tinuous measurement, a station scan or a topology scan.
Display all messages
In certain situations, dialogs with tips and questions are displayed by the PBT
application software. If the corresponding box in one of these dialogs is ticked,
such messages can be skipped in the future (e.g. "Do not display this message
again.").
If you wish this message to be displayed again, reactivate the option here.
DMF storage folder
This path specifies the storage folder that contains the device master files
(DMF) for displaying station information (see Section 4.13 "DMF information").
Measuring cycle timeout
The time entered in this field (in seconds) determines how long the measure-
ment of the quality level, of the disturbance-free voltage range (and of the
edges) may last for each station. If it is not permissible to determine all mea-
sured values for a station within the set time, this time must be increased.
4.12.2 Tester contact data
The PBT print function and the option of exporting the data to a CSV file can be used to display the contact
data of the plant tester. Use this tab to enter your contact data (optional).
PROFview XL 29
To Next Page
Loading...