Industrial Data Systems IDS 430 User Manual

IDS440 Users Manual version 4.2 Built In Application Programs
12
Built In Application Programs
The following built in programs are available:
1. Fill to Setpoint.
2. Checkweigh: Under/Between/Over.
3. Weigh-in / Weigh-out.
4. Axle Weigh – Short Scale.
5. Axle Weigh – Long Scale.
6. ID Tare and Total.
7. Peak Hold.
Use parameter function 73, “Initialize Function Memory”, to activate a built in program.
The initialize function erases function memory and setpoint monitor memory, and
initializes all parameters that have a password level of 1 or 2. Use parameter function 73
before configuring parameters with password level of 1 or 2.

Industrial Data Systems IDS 430 Specifications

General

Brand	Industrial Data Systems
Model	IDS 430
Category	Measuring Instruments
Language	English