16
Windows Mobile Utility
Download From Device
1) Verify that your Smartphone or PDA’s wireless connection is enabled and connect to the
LiteShow wireless network. The SSID is displayed on screen.
2) Open your browser. Although the LiteShow page should display automatically, you can also
enter the IP address displayed on the projector into your web browser. Note: The default IP
address of LiteShow is 192.168.100.10.
3) At the LiteShow Login screen, enter one of the following combinations to access the Download
options:
Login Default Password
None
Not applicable – No
password required
Basic User basic
Admin User admin
Note: If the default password listed above does not work, contact your IT administrator.
4) Download and install the MobiShow Utility, and follow the Installation Wizard instructions. (Or
download the Utility from the LiteShow USB token.)
5) Open Explorer on your phone and find the CAB file.
6) Double click on the CAB file to start installation.
7) Follow on-screen instructions to finish installation.
To Next Page
Loading...
