38
Appendix B: Using PtG Converter
1. Download the PtG Converter.exe file from the LiteShow USB token or from the InFocus
website at: www.infocus.com/support.
2. Once installed, the converter will reside in the MobiShow\MobiShow PtG Converter folder
within Programs.
3. Launch the PtG Converter and the following control panel will display:
4. Click Convert to select and start conversion of the desired PowerPoint presentation. PtG
Converter will convert the PowerPoint file to a PtG format. Note: Before clicking Convert,
turn off all extended monitors. Only the primary monitor should be active to ensure proper
PtG conversion.
5. After successfully converting the file, you can use any of the following controls:
Preview will expand or collapse the preview pane.
Play will playback the selected PtG file.
Open can be used to select another PtG file.
Play
Open Preview
Convert
To Next Page
Loading...
