Ingenico iPP350 - Card Response Issues

Payment Terminals | Page 13 of 54
3.3 Parameter Menu
The Parameter Menu options are explained in Table 3.
Level 1 Level 2 Level 3 Explanation
1 Function
Terminal ID Enter Unique ID
Amount Mode Øre/Kroner or Cent/Euro
Backup Solution (EOT) Yes/No
It is used to enable/disable
BankAxeptoine.Applicablein
Norway.
Service First Yes/No
To enable/disable card-initiated
transactions.
Information Field
No Information/CID/
Information Text/OperID
Additional information is required
to be sent to the PSP.
Sound None/On Error/Always
Always Copy No/Yes
Yes: Always 2 copies of receipt will
be printed
No: Only one copy of receipt will be
printed.
Duplicate Check No/Yes
Yes: Customer will not be able to
make 2 transactions with the same
amount.
No: Customer can make a number of
transactions with the same amount.
Language
NO, SE, DK, EN, FI, DE, HU, ET,
PL, NL, FR, ES
All these languages are supported
by the terminal.
Tips Total amount > Yes/No
Change Operator
Disable/After Reconc/After
Z-Total/Always/After 0-Report
This option comes into use when
there is more than one operator
using that terminal.
VAT
Fixed Rate/Change Rate/No
VAT
VAT Rate
Sleep Mode
Auto/Always (not visible if ECR
switched on)
Only applicable for battery-
operated terminals.
Power-OModes
Never/After 1 hour/After 2
hours
Power-OMenuwillnotworkif
power-charging is ongoing.
Fallback Language
NO, SE, DK, EN, FI, DE, HU, ET,
PL, NL, ES, FR
Languages will be downloaded from
the host environment.
Backlight Auto/Always
Chip Direction
Chip up/Chip towards you/Chip
down
The direction in which the chip is to
be inserted into the terminal.
Customer Receipt Always/On demand
IFR Priority Domestic/None/International
Visibility: Only shown when
merchant has an agreement with a
national scheme.
Comment: The latest setting value
can be downloaded from MS-TMS or
update to MS-TMS.
Table 3: Parameter Menu Options