Ingenico iPP350 - MSR Swipe (ISO)

Payment Terminals | Page 19 of 54
5.1.2 Purchase with Cash Withdrawal (Cashback)
This function is used to complete purchases that include cash withdrawals. Purchases + cash are shown as Option 2 under
Card services.
Press MENU.
Main menu
1 Purchase
2 Purchase + C/B
3 Card services
Press 2 - Purchase with C/B.
Amount + OK
100.00
Enter the purchase amount and press OK.
Amount + OK
20.00
Enter the cash amount and press OK.
NOK = 100.00
Awaiting card
Ask the customer to present their card.
APPROVED If authorised, the terminal display will show APPROVED and print a receipt.
5.1.3 Purchase with Manual Entry of Card Data
This function can be used to purchase and return goods. Enter card data on the terminal instead of the customer using his/
her card. This feature is only available for credit cards with signature check.
Press MENU.
Main menu
1 Purchase
Press OK for Purchase.
Amount + OK
100.00
Enter amount of purchase and press OK.
NOK = 100.00
Awaiting card
Press the F4 key (the key at the top right of the terminal).
Enter card no.: Enter the customer’s card number (from the front of the customer’s card) and
Expiry date:
/
Enter card expiry date mm/yy and press OK.
Enter CVC:
Enter the card’s CVC number and press OK. CVC is the last three digits of the
number that can be found on the back of the card next to the customer’s signa-
ture.
Amount = 100.00
OK or STOP
The amount is veried by pressing OK.
Cancel the transaction by pressing STOP.
APPROVED
If the amount is authorised, the terminal display will show APPROVED and print a
receipt.
NB: The user can skip the entry of CVC by pressing OK.