Ingenico iPP350 - Page 22

Payment Terminals | Page 22 of 54
› Print out a receipt on which the customer lls in the tips amount and the total amount.
› Customer enters the tips amount directly on the terminal.
› Customer enters the total amount, including tips, directly on the terminal.
5.2.4.2 Purchase with Tips
This function is used for purchases that include tips.
Press MENU.
Receipt, purchase with tips:
Nets
H. Martinsensvei
NO-0978 OSLO
Bax: 10139902-125442
BankAxept *****05040-3
05/07/2020 10:14
Ref.: 829764004472
Amount = 120.00
Extra = 30.00
Total = 150.00
Authorised
Thank you for your visit
We hope to see you again!
Main menu
1 Purchase
2 Purchase + C/B
3 Card services
Press OK for Purchase.
Amount + OK
120.00
Enter amount and press OK.
Amount = 120.00
Total = 150.00
Depending on the setup of the tips
function within the terminal, the ter-
minal will request that the customer
enters a tips amount or a total
amount (illustration to the left shows
total amount).
NOK = 150.00
Awaiting card
Ask the customer to insert card.
Amount = 150.00
Code + OK
Hide PIN entry
Ask the customer to enter PIN and
press OK (for credit card with signa-
ture, press only OK to conrm
amount).
APPROVED
If authorised, the terminal display will
show APPROVED and print a receipt.
5.2.4.3 DCC (Dynamic Currency Conversion)
DCC is a solution for instant currency conversion for international customers.
With DCC, the merchant can oer their international customers to pay in their own currency while the merchant will receive
the payment in local currency.
Through a message on the display screen, the customer will be oered to make the payment in their local currency.
The merchant will receive a small prot when the customer decides to pay in their own currency.
Contact Customer Service or Sales (refer to Section 20) to activate DCC on the terminal.