InHand CR202 - III. Web Configuration; 3.1 System; 3.1.1 Basic Setup; 3.1.2 System Time

8
III. WEB CONFIGURATION
The device need to be effectively configured before using. This chapter will introduce how to
configure your router via Web.
3. 1 SYSTEM
This part is used to check and configure system time, router WEB configuration interface,
language as well as the name of router.
3.1.1 Basic Setup
Check and set WEB configuration interface language and the name of router.
From the navigation tree, select System >> Basic Setup, then enter the “Basic Setup” page.
Table 3-1-1 Basic Setup Parameters
Basic settings
Function description: Select display language of the router web page and set personalized
name.
Parameters
Description
Default
Language
Configure language of WEB configuration interface
English
Host Name
Set a name for the host or device connected to the router
for viewing.
Router
3.1.2 System Time
To ensure the coordination between this device and other devices, it is required to set the system
time in an accurate way since this function is used to configure and check system time as well as
system time zone. System time page is used to configure and view system time and system time
zone.
From the navigation tree, select System >> Time, then enter the “Time” webpage, as shown below.
Click <Sync Time> to synchronize the time of the router with the system time of the PC.
Table 3-1-2 Parameters of System Time
System Time