Set DHCP lease time and reacquired after expiration
3.2.8 Static Route
Static route needs to be set manually, after which packets will be transferred to appointed routes.
To set static route, click the "Network >> Static Route" menu in the navigation tree, then enter
“Static Route” interface.
Table 3-2-8 Static Route Parameters
Function description: Add/delete additional static route of router. Generally, it's unnecessary for
users to set it.
Set IP address of the destination
Set subnet mask of the destination
Set the gateway of the destination
Select WAN/CELLULAR 1/LAN/WAN(STA) of the
destination
For recording significance of static route address (not
support Chinese characters)
3.3 SERVICES
3.3.1 DHCP Service
DHCP adopts Client/Server communication mode. Client sends configuration request to Server
which feeds back corresponding configuration information, including distributed IP address to the
Client to achieve the dynamic configuration of IP address and other information.
⚫ The duty of DHCP Server is to distribute IP address when Workstation logs on and ensure
each workstation is supplied with different IP address. DHCP Server has simplified some
network management tasks requiring manual operations before to the largest extent.
⚫ As DHCP Client, the device receives the IP address distributed by DHCP server after logging
To Next Page
Loading...