InHand CR202 - Alarm; Wlan; Network Connections

3 6
This page displays the traffic statistics on the dialing interface, including the statistics on the
traffic received in the latest month, traffic transmitted in the latest month, traffic received on the
last day, traffic transmitted on the last day.
3.9.4 Alarm
Choose Status >> Alarm to go to the "Alarm" page to view all alarms generated in the system
since power-on. You can clear or confirm the alarms.
The alarms have the following states:
 Raise: indicates that the alarm has been generated but not been confirmed.
 Confirm: indicates that the alarm cannot be solved currently.
 All: indicates all generated alarms.
The alarms are classified into the following levels:
 EMERG: The device undergoes a serious error that causes a system reboot.
 CRIT: The device undergoes an unrecoverable error.
 WARN: The device undergoes an error that affects system functions.
 NOTICE: The device undergoes an error that affects system performance.
 INFO: A normal event occurs.
3.9.5 WLAN
Choose Status >> WLAN to go to the "WLAN" page to query the WLAN connection status.
This page displays the WLAN connection information, including channel, SSID, BSSID, security,
signal (%), mode, and status.
3.9.6 Network Connections
From navigation tree, select Status >> Network Connections, then enter “Network Connections”
page to see the connections status.
This page shows the basis information of dialup and LAN.