EasyManua.ls Logo

InHand CR202 - II. Installation; 2.1 Preparations; 2.2 Installation; 2.2.1 SIM;UIM Card

InHand CR202
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
II. INSTALLATION
2.1 PREPARATIPNS
Precautions:
Please be sure there is 3G/4G network coverage. Avoid direct sunlight, away from heat source or
strong electromagnetic interference. First installation shall be done under direction of the engineer
recognized by InHand Networks.
1 PC
OS: Windows 7, Windows 10, Windows 11
Ethernet port: At least one (10M/100M)
1 SIM card:
Ensure the card is enabled with data service and its service is not suspended
because of an overdue charge.
Power supply:
5V/2A Type-C interface
Internal battery
Fixation:
Please place CR202 on flat level and have it installed in an environment with small
vibrational frequency.
The device shall be installed and operated in powered-off status!
2.2 INSTALLATION
2.2.1 SIM/UIM Card
CR202 supports single nano SIM card or eSIM. Please install the SIM card like below if use nano