InHand CR202 - III. Web Configuration; 3.1.3 Admin Access

9
Function description: Set local time zone and automatic updating time of NTP.
Parameters
Description
Default
Time of Router
Display present time of router
8:00:00 AM, 12/12/2015
PC Time
Display present time of PC
Present time
Timezone
Set time zone of router
Custom
Custom TZ String
Set TZ string of router
CST-8
Auto update Time
Select whether to automatically update
time, you may select when startup or
every 1/2/...hours.
On startup
NTP Time Servers
Select NTP server to synchronize time
1.pool.ntp.org
3.1.3 Admin Access
Admin services include HTTP, HTTPS, TELNET and SSHD.
HTTP
HTTP (Hypertext Transfer Protocol) is used for transferring web pages on Internet. After enabling
HTTP service on device, users can log on via HTTP and access and control the device using a web
browser.
HTTPS
HTTPS (Secure Hypertext Transfer Protocol) is the secure version of hypertext transfer protocol.
As a HTTP protocol which supports SSL protocol, it is more secure.
TELNET
Telnet protocol provides telnet and virtual terminal functions through a network. Depending on
Server/Client, Telnet Client could send request to Telnet server which provides Telnet services.
The device supports Telnet Client and Telnet Server.
SSHD
SSH protocol provides security for remote login sessions and other network services. The SSHD
service uses the SSH protocol, which has higher security than Telnet.
From the navigation tree, select System >> Admin Access, then enter “Admin Access” page.
Table3-1-3 Parameters of Admin Access
Admin Access
Function description:
1. Modify username and password of router.
2. The router can be accessed by the following 4 methods, http, https, telnet and SSHD.