InHand CR202 - III. Web Configuration; 3.1.4 System Log; 3.1.5 Configuration Management; 3.1.6 Scheduler

10
3. Set login timeout.
Parameters
Description
Default
Username/Password
Username
Set name of user who logs in WEB configuration page
adm
Old
Password
Previous password access to WEB configuration page
New
Password
New password access to WEB configuration pagee
N/A
Confirm
New
Password
Reconfirm the new password
N/A
Amin functions
Service Port
Service port of HTTP/HTTPS/TELNET/SSHD
80/443/23/22
Local
Access
Enable - Allow local LAN to administrate the router
with corresponding service (e.g. HTTP)
Disable - Local LAN cannot administrate the router with
corresponding service (e.g. HTTP)
Enable
Remote
Access
Enable - Allow remote host to administrate the router
with corresponding service (e.g. HTTP)
Disable - Remote host cannot administrate the router
with corresponding service (e.g. HTTP)
Enable
Allowed
Access from
WAN
(Optional)
Set allowed access from WAN
Set the hosts which
are allowed to
access the router,
e.g. 192.168.2.1/30
or
192.168.2.1-192.1
68.2.10
Description
For recording significance of various parameters of
admin functions (without influencing router
configuration)
N/A
Non-privileged users
Username
Configure non-privileged login user name
N/A
Password
Configure the password of the non-privileged user
N/A
Other Parameters
Log
Timeout
Set login timeout (router will automatically disconnect
the configuration interface after login timeout)
500 seconds
⚫ In “Username/Password” section, users can modify username and password rather than