13
3.1.7 Upgrade
The upgrading process can be divided into two steps. In the first step, firmware will be written in
backup file zone, in the second step: frimware in backup file zone will be copied to main firmware
zone, which should be carried out during system restart. During software upgrading, any operation
on web page is not allowed, otherwise software upgrading may be interrupted.
From the navigation tree, select “System >> Upgrade”, then enter the “Upgrade” page.
To upgrade the system, firstly, click <Browse> choose the upgrade file, secondly, click <Upgrade>
and then click <OK> to begin upgrade; thirdly, upgrade firmware succeed, and click <Reboot> to
restart the device.
3.1.8 Reboot
Please save the configurations before reboot, otherwise the configurations that are not saved will
be lost after reboot.
To reboot the system, please click the “System>>Reboot”, then click <OK>.
3.1.9 Logout
To logout, click “System >> Logout”, and then click <OK>.
3.2 NETWORK
3.2.1 CELLULAR
Insert SIM card and dial up to achieve the wireless network connection.
Click the “Network>>Cellular” in the navigation tree to enter Cellular configure page.
Table3-2-1-1 Parameters of Cellular
To Next Page
Loading...