InHand CR202 - IP BW Limit; Tools; Ping

33
3.5.1 IP BW Limit
Bandwidth control sets a limit on the upload and download speeds when accessing external
networks.
From the navigation tree, select QoS >> IP BW Limit.
Table 3-5-1 Parameters of IP BW Limit
IP Bandwidth Limit
Function description: Configure parameters of IP bandwidth limit.
Parameters
Description
Default
Enable
Click to enable IP bandwidth limit
Disable
Download bandwidth
Set download total bandwidth
1000kbit/s
Upload bandwidth
Set upload total bandwidth
1000kbit/s
Control port of flow
Select CELLULAR/WAN
CELLULAR
Host Download Bandwidth
Enable
Click to enable
Enable
IP Address
Set IP address
N/A
Guaranteed Rate (kbit/s)
Set rate
1000kbit/s
Priority
Select priority
Medium
Description
Describe IP bandwidth limit
N/A
3.6 TOOLS
3.6.1 PING
Enter the navigation tree, select Tools>>Ping.
Table 3-7-1 PING Detection Parameters
PING
Function description: Use ICMP to detection the connection status between router and
destination address.
Parameters
Description
Default
Host
Address of the destination host
N/A
PING Count
Set the PING count
4
Packet Size
Set the size of PING detection
32 bytes
Expert Option
Advanced parameter of PING is
available.
N/A