Controller CO3000
1.18 Auto-Tilt
There are two types of measurement.
Mast Height and Antenna Reference Height
When the system is set to "MAST HEIGHT", the inserted height value will relate to
the mast basket reference mark.
When set to "ANT-REF-HEIGHT", the inserted height value will relate to
the antenna reference mark.
Please consider this while setting up and conguring the Tilt-Mast.
innco systems GmbH
R
Erlenweg 12
D-92521 Schwarzenfeld
Germany
page 19
phone +49 9435 301 659 0
fax +49 9435 301 659 99
web www.inncosystems.com
mail info@inncosystems.com
To Next Page
Loading...