Controller CO3000
1.20 Setup Drawing
Figure 1.26:
Setup Drawing
If there is
no
slider connected, the
'SETUP M-DISTANCE'
is the same as Measurement Distance.
The mast will have to be moved manually into position or the antenna
will have to be moved to the correct position, using the polarisation-tube.
ATTENTION:
Moving the antenna will change the Ant.-Ref.-Length! If necessary, adjust!
For operation
with
slider, please use the Slider Setup manual.
innco systems GmbH
R
Erlenweg 12
D-92521 Schwarzenfeld
Germany
page 21
phone +49 9435 301 659 0
fax +49 9435 301 659 99
web www.inncosystems.com
mail info@inncosystems.com
To Next Page
Loading...