Electrical Design
‑45‑
Terminal Arrangement of the Drive Unit (Dual-axis)
Table 3–4 Main circuit terminal description of the drive unit (dual‑axis)
Terminal Code Terminal Name
Function Description
U1, V1, W1/U2, V2, W2 Device output terminals Used to connect a three‑
phase motor.
Grounding (PE) terminal Used for protective
grounding.
Table 3–5 Indicators of the drive unit (dual‑axis)
Indicator Code Indicator Name
Status Description
PWR
(yellow)
Power indicator Steady ON: powered on
OFF: powered off
RUN
(green)
Running indicator Steady ON: running
OFF: stopped
Blinking: operated by the
operating panel of the
power supply unit
ERR
(red)
Alarm indicator Steady ON: faulty
OFF: normal
Blinking: alarm
To Next Page
Loading...
