Electrical Design
‑49‑
3. Make lugs for U/V/W and grounding wire according to the following length
requirements.
3.1.3 Lug Selection
It is recommended to use the lugs produced by Zhejiang KISE Terminal Co., Ltd.,
including tube pre‑insulating lugs (TG‑JT type) and circular naked lugs (TO Type).
Figure 3‑2 Appearance and dimensions of the tube pre‑insulating lug (TG‑JT type)
Table 3–8 Specifications and dimensions of the tube pre‑insulating lugs (TG‑JT type)
Cable Section Model Dimensions (mm) Insulating Casing
Color
(1) For Germany
(2) For France
Crimp Tool
F L W Dφ Cφ
A.W.G.22
0.5 mm
2
E0512 12 18 2.7 1.3 1 (1) Orange
(2) White
OPT AN‑04WF
A.W.G.20
0.75 mm
2
E7512 12 18 2.8 1.5 1.2 (1) White
(2) Blue
OPT AN‑04WF
A.W.G.18
1.0 mm
2
E1012 12 18.5 2.9 1.7 1.4 (1) Yellow
(2) Red
OPT AN‑04WF
To Next Page
Loading...
