Product Information
‑23‑
Item Specifications
Customized functions Acceleration/Deceleration curve Linear curve, S‑curve mode 1, S‑curve mode 2
Built‑in PID The system implements the Proportional‑Integral‑Derivative
(PID) function (two groups of parameters) in the closed‑
loop control.
Running command channel Three channels are provided, including
LED operating panel or external LCD operating panel
setting, control terminal setting, and communication
setting, which can be switched over in various ways.
Frequency source Eight frequency sources are provided, including
digital setting, analog voltage setting, analog current
setting, communication setting, PID, multi‑speed, and built‑
in simple PLC.
You can perform switchover between these sources in
various ways.
Wobble function Various triangular wave frequency control functions are
provided.
1.4 Components
Components of the Power Supply Unit
Figure 1‑3 Components of the power supply unit
Table 1–12 Description of the components of power supply unit
No. Component Name
Description
1
Nameplate Used to display the product information.
2
Position of optional expansion
card 1
Used to install optional expansion card 1.
3
Position of expansion card 2 Used to install optional expansion card 2. It is
recommended that the Ethernet card be
installed at this position.
To Next Page
Loading...
