Inovance MD800 Series - Input Filter; EMC Filter

Selection of Options
‑97‑
Figure 4‑4 Dimensions of 50 A AC input reactor
Model and Dimensions (Schaffner)
The models of the recommended Schaffner AC input reactors are as follows.
Table 4–3 Model selection of the AC input reactor (Schaffner)
Model of Power Supply Unit Rated Input
Current (Heavy
Load) (A)
Reactor Model Inductance
(mH)
Power
Consumption
(W)
Single‑phase 200–240 V
MD800‑0‑2S24
MD800‑0‑2S24B
24 / / /
MD800‑0‑2S40
MD800‑0‑2S40B
40 / / /
Three‑phase 380–480 V
MD800‑0‑4T12
MD800‑0‑4T12B
12 RWK 3044‑18‑89‑E0XXX 1.67 103
MD800‑0‑4T22
MD800‑0‑4T22B
22 RWK 3044‑35‑92‑E0XXX 0.83 151
MD800‑0‑4T41
MD800‑0‑4T41B
41 RWK 3044‑48‑92‑E0XXX 0.61 172
4.1.3 Input Filter
4.1.3.1 EMC Filter
To enable the AC drive to meet the EN IEC 61800‑3 emission requirements, the AC
drive must be connected to the external EMC filter listed in the following table.
Inovance and Schaffner EMC filters can be used.