‑5‑
Fundamental Safety Instructions
● Check whether the packing is intact and whether there is damage, water seepage, dampness, and deformation before
unpacking.
● Unpack the package by following the unpacking sequence. Do not strike the package violently.
● Check whether there is damage, rust, or injuries on the surface of the equipment and equipment accessories before
unpacking.
● Check whether the package contents are consistent with the packing list before unpacking.
Storage and Transportation
● Large‑scale or heavy equipment must be transported by qualified professionals using specialized hoisting equipment.
Failure to comply may result in personal injuries or equipment damage.
● Before hoisting the equipment, ensure the equipment components such as the front cover and terminal blocks are
secured firmly with screws. Loosely‑connected components may fall off and result in personal injuries or equipment
damage.
● Never stand or stay below the equipment when the equipment is being hoisted by the hoisting equipment.
● When hoisting the equipment with a steel rope, ensure the equipment is hoisted at a constant speed without suffering
from vibration or shock. Do not turn the equipment over or let the equipment stay hanging in the air. Failure to comply
may result in personal injuries or equipment damage.
● Handle the equipment with care during transportation and mind your steps to prevent personal injuries or equipment
damage.
● When carrying the equipment with bare hands, hold the equipment casing firmly with care to prevent parts from falling.
Failure to comply may result in personal injuries.
● Store and transport the equipment based on the storage and transportation requirements. Failure to comply will result
in equipment damage.
● Avoid storing or transporting the equipment in environments with water splash, rain, direct sunlight, strong electric field,
strong magnetic field, and strong vibration.
● Avoid storing the equipment for more than 6 months. Long‑term storage requires stricter protection and necessary
inspections.
● Pack the equipment strictly before transportation. Use a sealed box for long‑distance transportation.
● Never transport the equipment with other equipment or materials that may harm or have negative impacts on this
equipment.
Installation
● The equipment must be operated only by professionals with electrical knowledge.
To Next Page
Loading...
Need help?
General