Electrical Design
‑63‑
Table 3–16 Signal definitions of communication terminals and commissioning terminals (CN3, CN4,
and CN5)
Outline Drawing Terminal Type Terminal
Code
Terminal Function Specifications
RJ45 network
terminal
CN3
1. CAN communication terminal
2. Used to connect GP‑inolink for
software upgrade and
commissioning
The CANopen/CANlink
communication protocol is
supported. The maximum
baud rate is 1 Mbps. Up to
64 nodes can be connected.
The maximum distance is
1000 m. The daisy chain
mode is required for wiring.
RJ45 network
terminal
CN4
1. CAN communication terminal
2. Used to connect GP‑inolink for
software upgrade and
commissioning
3. Used to connect the SOP‑20
operating panel for commissioning
USB type C CN5 Used to connect a computer for
software upgrade and commissioning
USB 2.0 standards
Table 3–17 Signal definitions of external 24 V input terminals (CN6)
Outline Drawing Terminal Type Terminal
Code
Terminal Function Specifications
+24V power input (+) 24V External 24 V power input Maximum input current
required: 1 A
+24V power input (‑) COM
To Next Page
Loading...
