Inovance MD800 Series Communications Guide

Modbus Communication
‑27‑
D300. Therefore, convert D300 to a floating‑point number and then divide the
conversion result by 10.
The configuration and procedure are as follows:
4. Read output voltage
Based on the conversion rule, convert the output voltage U003 to 7003 and then
the reading is the actual output voltage. Based on the communication
configuration, you can move or not move the D302 value to another D element.
The configuration and procedure are as follows:
5. Read output current
Based on the conversion rule, convert the output current U004 to 7004. Then,
divide the reading by 100 to obtain the actual output current.
The configuration and procedure are as follows:
6. Read AC drive state
Read 3000H to directly obtain the current state of the AC drive. (1: Forward running;
2: Reverse running; 3: Stop)
The configuration and procedure are as follows:

Inovance MD800 Series Specifications

General

Brand	Inovance
Model	MD800 Series
Category	DC Drives
Language	English