Inovance MD800 Series - Emergency Message and AC Drive Faults

-3-
Emergency Message and AC Drive Faults
Emergency Message and AC Drive Faults
Emergency Message Data
The following table describes the seven bytes in an emergency message.
Table ‒1 Emergency message data
Emergency Error Code Error Register
Vendor Defined Error Code
0 to 1 2 3 to 7
Note
● Emergency error code: See related sections in the DS301 document. 0x8100
indicates a communication error and 0xFF00 indicates a vendor defined error.
●
Error register: See the data value of the object dictionary 1001H in related sections
of the DS301 document. Bit0 indicates the error generation flag, bit4 indicates the
communication error flag, and bit7 indicates a vendor defined error.
●
Vendor defined error code: The fault code of the AC drive.
Fault Code
The following table lists standard fault codes of the MD800 AC drive. For details about
the fault codes, see the MD800 Series Multidrive AC Drive Maintenance Guide.