Insignia NS-42E859A11 User Manual

88
www.insigniaproducts.com
Using Your TV NS-32E859A11/NS-42E859A11
If your home network does not use DHCP, select Let me
specify a static IP address, then press SELECT. The
following screen opens. Complete Steps 5 through 8 to
complete the setup.
5 Press SELECT. The Enter IP Address screen opens.
6 Use the number buttons on the remote control to enter
your IP address, then press SELECT.
7 If the displayed IP information is correct, press S or T to
highlight Yes, these are correct, then press SELECT.
OR
If the displayed IP information is not correct, press
S or T to
highlight No, let me enter specific address, then press
SELECT. Enter your subnet mask, gateway (router) address,
and DNS address.
When the connection is successful, the Network settings
screen opens.
If this is the first time you have set up the Internet, the
Network Speed Test screen opens. Follow the on-screen
instructions to complete the network setup.
10:00 PM
Static IP Setup
In this next part, you’ll specify a static IP address. To complete this process,
you will need to know the following:
- IP address
- Subnet mask
- Gateway (router) address
- DNS (name server) address
Continue
10:00 PM
Enter IP address
Use the number buttons on the remote control to enter your IP address.
Press SELECT when done
.
.
.
25
10:00 PM
Use these IP Addresses?
Are all of the following correct?
Subnet mask:
Gateway (router) address:
DNS (name server) address:
255.255.255.0
192.168.1.1
192.168.1.1
Yes, these are correct
No, let me enter specific addresses

Insignia NS-42E859A11 Specifications

General

Display diagonal	42 \
Display brightness	450 cd/m²
Supported video modes	1080p
Contrast ratio (dynamic)	12000:1
Screen format adjustments	16:9
Supported graphics resolutions	1920 x 1080 (HD 1080)
3D	No
Backlight	-
Headphone connectivity	3.5 mm
HDMI ports quantity	4
DVI-D ports quantity	1
DVI-I ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible memory cards	Not supported
Product color	Black
Panel mounting interface	200 x 200 mm
RMS rated power	- W
Number of speakers	3
Power consumption (standby)	1 W
Power consumption (typical)	115 W
Remote control type	Standard

Weight and Dimensions

Depth (with stand)	279.4000 mm
Weight (with stand)	17780.8209 g
Depth (without stand)	50.8000 mm
Width (without stand)	990.6000 mm
Height (without stand)	609.6000 mm
Weight (without stand)	14605.6743 g