2-7
Environmental Specifications
Product Support: www.instron.com
Instron testing systems are CE marked. A signed CE declaration of conformity is supplied
with each system.
Environmental Impact
Instron materials testing systems and their accessories are designed to produce no adverse
environmental impact during normal use as long as they are operated and serviced in
accordance with their operating instructions.
Normal care must be taken with service items such as greases and oils needed to operate and
maintain the equipment as indicated in their packaging and operating instructions.
These systems comprise mechanical and electronic components that contain potentially
environmentally harmful chemicals, such as chromium, chromates, lead and brominated fire
retardants. Care must be taken at the end of the equipment's life to ensure its disposal in
accordance with local environmental regulations.
Because of the wide range of applications where our instruments are used, Instron has no
knowledge of the environmental impact of the customer's test pieces or specimens.
Noise Levels
The noise output for table model load frames does not exceed 70dB(A). Noise levels do not
include noise from specimen breaks.
The noise level of the entire system depends on your particular system configuration. Refer
to the documentation supplied with other system components for information about that
component's noise level.
The noise output from equipment used for materials or structures testing is also dependent
upon the items under test. Instron recommends that users carry out their own noise level
measurements to ensure the continuous safety and comfort of personnel.
To Next Page
Loading...
Need help?
General
