Instron DX Series User Manual

Chapter 3: Operation
40 M47-17027-EN
300DX-G7 No No
Split bolt-on style, four M10 x 35 mm SHCS
(use 8 mm hex key)
600DX-G1
Two-piece style, two 3/8-24 SHCS
(use 5/16 in hex key)
Not used when crosshead in highest notch position
No
Two-piece style, two 3/8-24 SHCS
(use 5/16 in hex key)
600DX-G7
Two-piece style, two 3/8-24 SHCS
(use 5/16 in hex key)
Not used when crosshead in highest notch position
2
No
Two-piece style, two 3/8-24 SHCS
(use 5/16 in hex key)
1. SHCS = socket head cap screw
2. For 600DX frame models, the upper retaining rings are not used when the tension crosshead is in the highest notch position.
The crosshead is secured in place by the column caps.
Table 10. Retaining ring use, style and fastener information. (Continued)
Frame
Model Upper Retaining Ring Spacer Lower Retaining Ring

Instron DX Series Specifications

General

Brand	Instron
Model	DX Series
Category	Test Equipment
Language	English