10
Layer: The Layer knob sets the currently selected layer. There are six
layers which can store up to 10 seconds of audio each.
• They are referred to as alpha, beta, gamma, delta, epsilon,
and zeta.
• Layer content is set at the beginning of each grain and remains
unchanged for the duration of the grain.
• When the knob is fully clockwise and the omega Layer Indicator is
illuminated, all layers are consecutively available via the
Scan parameter.
• To ensure the absence of audio drop outs at extreme Scan
parameter positions, arbhar will record for an extra 2 seconds at
the end of each layer.
Layer Indicators: The Layer Indicators will illuminate around the Layer
knob to indicate the currently selected layer.
• When the knob is fully clockwise and the omega Layer Indicator is
illuminated, the currently selected layer is determined by the position
of the Scan parameter and indicated by the corresponding
Layer Indicator.
10 SECONDS EACH
ALL LAYERS LINKED
To Next Page
Loading...