INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com
Specifications subject to change without notice. | GAGC06_E_0516 | USA 200303 | Page 19 of 41
DGC6 – UserManual
4.6.5 Error Status
Symbol Description
Setting
Status
Function
OFF System Errors OFF OFF = Faults are not stored.
ON = Faults are stored.
Release of the fault recording for all active measuring points on the USB device in the common CSV le for alarms
and faults.
Internal structure of the le
(The headlines are not written in the le!)
Current Time Source Error Code + Error present
- Error absent
Error date (month day)
Time(hours minutes)
Error text
10_22_28 DP 79 0x8100 + 03_30 10_20 Underrange
13_48_28 DP 79 0x8100 - 03_30 13_46 Underrange
The rst column gives the current time, the second one the error source. The third column indicates the error code.
In the fourth column there is the action:
+ = Error occurred.
- = Error acknowledged.
The fth column gives the time and date when the error has occurred
From the sixth column on, there is the plain text of the error code. If several errors are coded so you can read multiple
entries here.
Every internal restart of the system (system reset) is also documented in the current day le.
Frequent reboots (several times per day) may point to a technical problem. Please consult the installer as soon as
possible.
Info Date Time
DGC06 Reset 30_03_12 13_38_19
To Next Page
Loading...
Need help?
General