Intec Controls MSR PolyGard 2 DGC6 User Manual

INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com
Specifications subject to change without notice. | GAGC06_E_0516 | USA 200303 | Page 24 of 41
DGC6 – UserManual
4.8.2 Menu Relay Parameter
Reading and changing of the parameters separately for each relay.
Alarm Relay 1
Used
Alarm Relay
Parameters
Submenu 1
Selection of alarm relay (1-32)
Submenu 2
Signal Relay
Parameters
Signal Relay 1
Not Used
Selection of signal relay (1-96)
Submenu 3
Relay Mode
Used
Relay Mode
Energized
Steady / Flashing
ON
Alarm quantity
1
Time - Recurr - DI
0s Yes 0
External Mode
 DI 0  DI 0
Delay ON Time
0 s
Function Fault
OFF
Delay OFF Time
0 s
Function Maint.
OFF
Relay mode
See 4.8.2.1
Operation mode relay
See 4.8.2.2
Relay function
See 4.8.2.3
Alarm trigger quantity
See 4.8.2.4
Denition horn function
See 4.8.2.5
Denition external operation
See 4.8.2.6
Delay time for relay ON
See 4.8.2.7
Collective fault OR operation
See 4.8.2.8
Delay time for relay OFF
See 4.8.2.7
Maintenance OR operation
See 4.8.2.9

Intec Controls MSR PolyGard 2 DGC6 Specifications

General

Brand	Intec Controls
Model	MSR PolyGard 2 DGC6
Category	Controller
Language	English