20
AirPlay
®
Basic Operations
You can wirelessly enjoy the music files on
an iPhone
®
, iPod touch
®
, or iPad
®
connected to the same access point as this
unit.
0 Update the OS version on your iOS
device to the latest version.
0 There may be some differences in the
operations screens and how operations
are performed on the iOS device
depending on the iOS version. For
details, see the operating instructions for
the iOS device.
1. Connect the iOS device to the access
point.
2. Press NET.
3. Tap the AirPlay icon in the play
screen of the music app on the iOS
device and select this unit from the list of
devices displayed.
4. Play the music files on the iOS device.
0 The default status is for the NET Stby
feature to be on, so when you do steps 3
and 4 above, this unit automatically
comes on and input switches to "NET".
To reduce the amount of power
consumed in standby mode, press the
Setup button on the remote controller,
then in the Setup menu displayed set "3.
Hardware" -"NET Stby" to "Off".
0 Due to the characteristics of AirPlay
wireless technology, the sound produced
on this unit may slightly be behind the
sound played on the AirPlay-enabled
device.
You can also play the music files on a
computer with iTunes (Ver. 10.2 or later).
Before operation, make sure this unit and
the PC are connected to the same network,
then press NET on this unit. Next, click the
AirPlay icon in iTunes, select this unit
from the list of devices displayed, and start
play of a music file.
To Next Page
Loading...
Need help?
General
