EasyManua.ls Logo

Integra DTM-6 - General Specifications

Integra DTM-6
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
En
General Specifications
Amplifier (Audio) section
Rated Output Power (FTC) (North American)
With 8 ohm loads, both channels driven, from 20 -
20,000 Hz; rated 70 watts per channel minimum RMS
power, with no more than 0.08% total harmonic distortion
from 250 milliwatts to rated output.
Rated Output Power (IEC) (European)
2 ch k 135 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD
Maximum Effective Output Power (JEITA) (North American)
2 ch k 160 W at 6 ohms, 1 kHz, 2 ch driven of 10% THD
Dynamic Power (*)
(*)IEC60268-Short-term maximum output power
180 W (3 , Front)
160 W (4 , Front)
100 W (8 , Front)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance (1 kHz,100 W/8 )
200 mV/50 k (LINE (Unbalance))
2.5 mV/50 k (PHONO MM)
Rated RCA Output Level and Impedance
150 mV/470 (PRE OUT)
470 mV/680 (SUBWOOFER PRE OUT)
200 mV/2.2 k (ZONE OUT)
150 mV/2.2 k (ZONE PRE OUT)
Phono Overload
70 mV (MM 1 kHz, 0.5%)
Frequency Response
10 Hz - 100 kHz/i1 dB, j3 dB (Direct)
Tone Control Characteristics
n10 dB, 100 Hz (BASS)
n10 dB, 10 kHz (TREBLE)
Signal to Noise Ratio
106 dB (IHF-A, LINE IN, SP OUT)
80 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance
4 - 16
Headphone Output Impedance
390
Headphone Rated Output
200 mW (32 , 1 kHz, 10% THD)
Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (European)
AM Tuning Frequency Range
530 kHz - 1710 kHz (North American)
522/530 kHz - 1611/1710 kHz (European)
Preset Channel
40
Network Section
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
IEEE 802.11 a/b/g/n standard
(Wi-Fi
®
standard)
2.4 GHz/5 GHz band
BLUETOOTH Section
Communication system
BLUETOOTH Specification version 4.1+LE
Frequency band
2.4 GHz band
Modulation method
FHSS (Frequency Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP 1.2
AVRCP 1.3
HOGP-Host (Client)
HOGP-HID Device (Server)
HID Service (HIDS)
Supported Codecs
SBC
AAC
Transmission range (A2DP)
20 Hz - 20 kHz (Sampling frequency 44.1 kHz)
Maximum communication range
Line of sight approx. 48y/15 m (*)
(*)The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, cordless phone,
reception sensitivity, antenna’s performance, operating
system, software application, etc.
General
Power Supply
AC 120 V, 60 Hz (North American)
AC 220 - 230 V, 50/60 Hz (European)
Power Consumption
230 W (North American)
220 W (European)
0.1 W (Stand-by)
70 W (No-sound, North American)
65 W (No-sound, European)
2.9 W (Hybrid Standby)
Dimensions (W k H k D)
435 mm k 149 mm k 329 mm
17-1/8z k 5-7/8z k 12-15/16z
Weight
8.5 kg / 18.7 lbs
Audio Inputs
Digital
OPTICAL 1 (GAME), 2 (TV/TAPE)
Maximum Fs: 192 kHz
COAXIAL 1 (BD/DVD), 2 (CBL/SAT)
Maximum Fs: 192 kHz
Analog
PHONO, CD, TV/TAPE, GAME, PC, CBL/SAT, BD/DVD
Audio Outputs
Analog
SUBWOOFER PRE OUT
PRE OUT L/R
LINE OUT L/R
ZONE2 PRE/LINE OUT L/R
ZONE2 SUBWOOFER PRE OUT
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
SN29403237_DTM-6_En_1707XX.book 47 ページ 2017年7月27日 木曜日 午後1時39分

Related product manuals