Integra DTR-30.1 User Manual

11
Front & Rear Panels—Continued
North American models
Australian models
a DIGITAL IN COAXIAL 1 and 2
These coaxial digital audio inputs are for connect-
ing components with coaxial digital audio outputs,
such as CD and DVD players. They’re assignable,
which means you can assign each one to an input
selector to suit your setup. See “Digital Input
Setup” on page 43.
b DIGITAL IN OPTICAL 1 and 2
These optical digital audio inputs are for connecting
components with optical digital audio outputs, such
as CD and DVD players. They’re assignable, which
means you can assign each one to an input selector
to suit your setup. See “Digital Input Setup” on
page 43.
c COMPONENT VIDEO IN 1 and 2
These RCA component video inputs are for con-
necting components with a component video out-
put, such as a DVD player, DVD recorder, or DVR
(digital video recorder). They’re assignable, which
means you can assign each one to an input selector
to suit your setup. See “Component Video Setup”
on page 42.
d COMPONENT VIDEO OUT
This RCA component video output is for connect-
ing a TV or projector with a component video input.
e HDMI IN 1–5 and OUT
HDMI (High Definition Multimedia Interface) con-
nections carry digital audio and digital video.
The HDMI inputs are for connecting components
with an HDMI output, such as a DVD player, Blu-
ray Disc Player, DVD recorder, or DVR (digital
video recorder). They’re assignable, which means
you can assign each one to an input selector to suit
your setup. See “HDMI Input Setup” on page 41.
The HDMI output is for connecting a TV or projec-
tor with an HDMI input.
Rear Panel
b
j
k
l
m
n
o p q r tv wx
y
us
cdeaghif
DTR-30.1_En_A.book 11 ページ ２００９年４月９日 木曜日 午後１時３０分

Integra DTR-30.1 Specifications

General

Brand	Integra
Model	DTR-30.1
Category	Receiver
Language	English