Intel 4 Series User Manual

Introduction
9 Thermal and Mechanical Design Guidelines
1.2 Reference Documents
Document Location
Intel
®
4 Series Chipset Family Datasheet http://www.intel.com/assets/p
df/datasheet/319970.pdf
Intel
®
I/O Controller Hub 7 (ICH7) Thermal Design Guidelines http://www.intel.com/assets/p
df/designguide/307015.pdf
Intel
®
I/O Controller Hub 10 (ICH10) Thermal Design Guidelines http://www.intel.com/assets/p
df/designguide/319975.pdf
Intel
®
Core
™
2 Duo Processor E8000
Δ
and E7000
Δ
Series and Intel
®
Pentium
®
Dual-Core Processor E5000
Δ
Series Thermal and
Mechanical Design Guidelines
http://www.intel.comdesign/pro
cessor/designex/318734.pdf
Intel
®
Core™2 Extreme Quad-Core Processor and Intel® Core™2
Quad Processor Thermal and Mechanical Design Guidelines
http://www.intel.com/
design/processor/designex/
315594.htm
Balanced Technology Extended (BTX) Interface Specification http://www.formfactors.org
Various System Thermal and Mechanical Design Suggestions http://www.formfactors.org
Various Chassis Thermal and Mechanical Design Suggestions http://www.formfactors.org
§

Intel 4 Series Specifications

General

Chipset Series	Intel 4 Series
Process Technology	65nm
Memory Type	DDR2, DDR3
SATA Ports	6
USB Ports	12
RAID Support	Yes (ICH10R)
Southbridge	ICH10, ICH10R
FSB	800/1066/1333 MHz
DirectX Support	DirectX 10 (on integrated graphics variants)
SATA Revision	2.0
Chipset Variants	G41, G43, G45, P43, P45
PCI Express Lanes	16
Max Memory	16 GB
Integrated Graphics	Intel GMA X4500 (G41, G43, G45)