Intel S1200SPL User Manual

Intel® Server Board S1200SP Family Technical Product Specification
29
3.4.10 System Management Bus (SMBus* 2.0)
The Intel
®
C230 series chipset contains a SMBus* Host interface that allows the processor to communicate with
SMBus* slaves. This interface is compatible with most I
2
C devices. Special I
2
C commands are implemented.
The Intel
®
C230 series chipset’s SMBus* host controller provides a mechanism for the processor to initiate
communications with SMBus* peripherals (slaves). Also, the Intel
®
C230 series chipset supports slave
functionality, including the Host Notify protocol. Hence, the host controller supports eight command protocols
of the SMBus* interface (see System Management Bus (SMBus*) Specification, Version 2.0): Quick Command,
Send Byte, Receive Byte, Write Byte/Word, Read Byte/Word, Process Call, Block Read/Write, and Host Notify.
The Intel
®
C230 series chipset’s SMBus* also implements hardware-based Packet Error Checking for data
robustness and the Address Resolution Protocol (ARP) to dynamically provide address to all SMBus* devices.
3.4.11 Intel
®
Virtualization Technology for Direct I/O (Intel
®
VT-d)
The Intel
®
C230 series chipset provides hardware support for implementation of Intel
®
Virtualization
Technology with Directed I/O (Intel
®
VT-d). Intel
®
VT-d Technology consists of technology components that
support the virtualization of platforms based on Intel
®
Architecture Processors. Intel
®
VT-d Technology enables
multiple operating systems and applications to run in independent partitions. A partition behaves like a Virtual
Machine (VM) and provides isolation and protection across partitions. Each partition is allocated its own subset
of host physical memory.
3.5 Integrated Baseboard Management Controller (BMC)
Overview
The Integrated BMC is provided by an embedded ARM9* controller and associated peripheral functionality
that is required for IPMI-based server management. Firmware usage of these hardware features is platform
dependent.
The following is a summary of the Integrated BMC management hardware features that comprise the BMC:
• IPMI 2.0 Compliant
• 400MHz 32-bit ARM9* processor with memory management unit (MMU)
• Two independent 10/100/1000 Mb/s Ethernet Controllers with RMII/RGMII support
• DDR2/3 16-bit interface with up to 800 MHz operation
• Sixteen 10-bit ADCs
• Sixteen fan tachometers
• Eight Pulse Width Modulators (PWM)
• Chassis intrusion logic
• JTAG Master
• Eight I
2
C interfaces with master-slave and SMBus* timeout support. All interfaces are SMBus* 2.0
compliant.
• Parallel general-purpose I/O Ports (16 direct, 32 shared)
• Serial general-purpose I/O Ports (80 in and 80 out)
• Three UARTs
• Platform Environmental Control Interface (PECI)
• Six general-purpose timers
• Interrupt controller
• Multiple Serial Peripheral Interface (SPI) flash interfaces

Intel S1200SPL Specifications

General

Brand	Intel
Model	S1200SPL
Category	Server Board
Language	English