Intel® Server Board S1200SP Family Technical Product Specification
36
To access this screen from the Main screen, select the Security option.
Error! Reference source not
ound.
<Installed/Not Installed>
Error! Reference source not
ound.
<Installed/Not Installed>
Error! Reference source not
ound.
Error! Reference source not
ound.
Error! Reference source not
ound.
Error! Reference source not
ound.
Error! Reference source not
ound.
<Displays current TPM Device State>
Error! Reference source not
ound.
No Operation/Turn On/Turn Off/Clear
Ownership
Figure 18. Setup Utility – TPM Configuration Screen
Table 9. TPM Setup Utility – Security Configuration Screen Fields
Enabled and
Activated
Enabled and
Deactivated
Disabled and
Activated
Disabled and
Deactivated
Information only.
Shows the current TPM device state.
A disabled TPM device will not execute
commands that use TPM functions and TPM
security operations will not be available.
An enabled and deactivated TPM is in the same
state as a disabled TPM except setting of TPM
ownership is allowed if not present already.
An enabled and activated TPM executes all
commands that use TPM functions and TPM
security operations will be available.
TPM
Administrative
Control**
No Operation
Turn On
Turn Off
Clear Ownership
[No Operation] - No changes to current
state.
[Turn On] - Enables and activates TPM.
[Turn Off] - Disables and deactivates
TPM.
Any Administrative Control operation selected
will require the system to perform a Hard Reset
in order to become effective.