Intel S5520HC User Manual

VMware vSphere* 4.1 Installation Guide for ESX/ESXi* 4.1
54
Figure 41 – Add Static Target Server Dialog Window
29) In the Add Static Target dialog, enter the IP address 192.168.1.220 for the Open-E* server and the
target name used previously for host 1. Verify that it is typed or pasted in correctly, then click “OK”.
30) The iSCSI target should appear in the dialog.
Figure 42 – Add Static Target Server Properties

Intel S5520HC Specifications

General

Brand	Intel
Model	S5520HC
Category	Software
Language	English